![]() Should this not work NEVER use a hammer or similar object. Note: If at any time any centre post is not properly positioned beneath the frame it may be necessary to hit the post sharply with the base of the hand. Once all rods are in place and the net is up on mat recheck that centre posts are in correct position. Once the net and all mat rods are correctly in place ensure no netting is sitting on top of any centre post seat.Īfter connecting the 1st rod at each 1st rod position to the mat recheck that the net is still not caught between the seat of the centre post and frame and where necessary push each centre post further under the frame (even if only a fraction).Īfter connecting a further 2 rods at each ‘station’ thus exerting more pressure on the frame and legs recheck the net is not caught and again push each centre post further under the frame as necessary.Īfter connecting a further 4 rods at each ‘station’ continue as in step 4. ![]() It is important at this point also to ensure the seat of the post is turned in position ready to be accommodated by the curve of the frame. the inside edge of the rubberized seat of the post is under the frame. Method for ensuring leg Centre Posts are correctly in place and that enclosure nets are not caught between the seat of the centre post and the frame:īefore beginning to join the net and mat rods to the frame ensure centre posts are as best under the frame as possible i.e. If you have your own sockets / wrenches at home however, you can use one 1/2" (13mm) socket wrench and one 1/2" combination wrench. Springfree™ Trampoline supplies two flat wrenches to fasten the bolts and nuts. Please look at the quick tip installation guides first. ![]() Here you will find some useful tips on the most frequently asked installation questions.Įach model will differ slightly in its assembly, so while these tips can be a handy guide, we recommend you refer closely to your Instruction Manual found in your Springfree™ Trampoline packaging. The Springfree™ Trampoline and FlexiNet™ enclosure system is designed to be self assembled.įor first time installation, it should take two adults around two hours to complete. ![]()
0 Comments
Leave a Reply. |